Radial Trim Two Passive Stereo DI Box
Radial Trim Two Passive Stereo DI Box
- Pengirim: Bliaudio-skr
- Asal Pengiriman: Jakarta Utara, DKI Jakarta
- Kode Produk: Trim Two
- Tersedia: Dalam Stok
-
Rp 3.384.000
Trim-Two
Passive Stereo Direct Box with Level
Control
The Trim-Two™ is a
passive stereo direct box designed for use with laptop computers and other
consumer playback devices, eliminating hum and buzz from ground loops while
providing an easy-access level control for quick adjustments on stage.
·
Stereo
direct box for line level sources
·
Passive
signal path with transformer isolation
·
Eliminates
hum and buzz when connecting to the PA
·
Level
control & mono sum switch
A noise-free interface for your audio devices
The
Trim-Two allows you to connect any playback device and interface it with
balanced pro audio equipment without signal loss or hum and buzz from ground
loops. It features two transformers which isolate and balance the audio output
from your source device, eliminating noise and allowing you to use long cable
runs without signal degradation. A handy mono sum switch makes it easy to
reduce the output channel count or send the same signal to two destinations at
once, and an accessible level control gives you the ability to adjust levels in
an instant. Multiple input connector types make it easy to hook up any consumer
line level playback source, from laptops & smartphones to DJ equipment. The
completely passive design means that you never have to worry about powering the
Trim-Two, making it truly plug & play.
|
Specifications |
|
|
Audio circuit type: |
Passive, transformer based |
|
Transformer: |
Custom |
|
Number of channels: |
Dual channel (stereo) |
|
Frequency response: |
20Hz to 20KHz |
|
Dynamic range: |
>100dB |
|
Total harmonic distortion: |
0.009% |
|
Phase Deviation: |
<10° |
|
Input Impedance: |
10K Ω, unbalanced |
|
Output Impedance: |
2.8K Ω, balanced |
|
Maximum Input: |
+20dB @ 20Hz |
|
Features |
|
|
Input pad, Mono Sum, Ground lift |
|
|
Input Connectors: |
1/4" RCA and 3.5mm input |
|
Output Connectors: |
XLR-M output |
|
Extras: |
Copper foil shield |
|
General |
|
|
Construction: |
14 gauge steel chassis & outer shell |
|
Size (L x W x D): |
3.3" x 5.0" x 2" (84 x 127 x 48mm) |
|
Weight: |
1.55 lbs (0.70 kg) |
|
Shipping size (L x W x D): |
4" x 3" x 6.5" (102 x 76 x 165mm) |
|
Shipping weight: |
1.92 lbs (0.87 kg) |
|
Power: |
Passive, no power required |
|
Conditions: |
For use in dry locations only between 5°C and
40°C |